SAVE 20% DISCOUNT CODE: SAVE20 The OMS Weight Belt is designed to carry soft/loose weights. The Belt is available in 5 different sizes, as we understand one size does not fit all. Made from 420 Denier Nylon for durability and Heavy-Duty PVC coated Mesh for extremely easily drainage. Each pocket holds up to 2.3kg.
The OMS BigGrip Bolt Snaps are made from top quality Stainless Steel; built to last.
SAVE 20%DISCOUNT CODE: SAVE20 Introducing the bright and high-vis OMS Red and Yellow Safety Set, inclusive of an SMB, Spool and Double-Ender Clip all in various shapes and sizes. The Safety Pocket attaches to any 2" webbing as well as your BCD. A handy zip permits easy access but prevents your gear from falling out.There are 4 options in Red/Yellow and 2...
OMS Bookscrews are used to secure an accessories into place on a harness, BCD, backplate or wing.Available in sizes: 12mm and 18mm
OMS Inflator Hoses have a built-in 3/8inch male at one end of the hose, that screws into the first stage LP port, and the other end has a quick disconnect female schrader valve fitting that accepts a standard BC inflator male QD.Available in 4 different sizes.
OMS BigGrips are available as Bolt-Snaps or Double-Enders. OMS BigGrip clips have an extended section on the gate that allows for easier use of the clip. Made from extremely sturdy and hardwearing materials; built to last.
SAVE 20% DISCOUNT CODE: SAVE20 OMS have introduced Safety Kits; each kit contains an SMB, Spool and Double-Ender Clip. The Safety Pocket attaches to any 2" webbing as well as your BCD. A handy zip permits easy access but prevents your gear from falling out.Stand out from the crowd with this electric pink bag and accessories to match - easily recognised...
SAVE 20% DISCOUNT CODE: SAVE20 The OMS Tattoo Mask is a one window frameless mask with ultra low volume. This mask also features a unique 3D contoured mask strap that helps prevents folding.The skirt design is available in an additional smaller size to accommodate a range of face sizes.
The OMS Graphite Pen is a replacement pen for the OMS Wrist Slate so you are always prepared.
The OMS Safety Pocket for SMB and Spool is available in two colours. It's designed with strong and quick drain mesh material, and is the perfect size to carry a Surface Marker Buoy and a Spool. The Safety Pocket can also be used for carrying camera accessories, including wide angle lenses. To secure this pouch, use the 2" strap located on the back of the...
SAVE 20% DISCOUNT CODE: SAVE20 The OMS Wrist Slate features 3 hard wearing plastic pages, a graphite pencil and velcro strap. The OMS Wrist Slate gives you the best solution for storing multiple dive plans or can act as a communication tool with your diving buddies.
The Reefstream Fins are a new addition to the OMS line. Ultra-light and well suited for any travelling Diver. The sculptured foot pocket has been debveloped for most types of boots while securely transferring the energfy to the blade as efficiently as possible. The Fin itself propels you with control for all kicking styles including the frog-kick and...
The OMS 2" Nylon Cam Band with Stainless Buckle is 36" in length and includes the OMS Friction Pad to provide a secure grip on your tank and eliminate movement during your dive. A generous length of Velcro allows for a secure closure around the cylinder throughout the dive.
The OMS Trim Weight Pocket (2.3kg) is ideal to hold additional weight on your waist or tank strap.
OMS Corrugated Hoses for OMS BC Systems.
This new and improved OMS Spool design allows the diver to create drag and effectively control the speed of the line by easily squeezing the center of the spool. This feature is particularly useful for divers who deploy their SMB’s at great depth. Each spool comes pre-packed with the nylon line and there is also a stainless steel double ender clip. It has...
The OMS Mask Pocket is ideal for storing essential accessories such as a Mask or a spare SMB and spool.
The OMS 2" Nylon Cam Band with Plastic Buckle is 36" in length and includes the OMS Friction Pad. The Friction pad provides extra grip on your cylinder and eliminates excess movement during your dive. A generous length of Velcro allows for a secure closure around the cylinder throughout the dive.
The OMS Spring Straps are designed to fit the Slipstream Fins. Comes complete with pins and is built with Stainless Steel.
The OMS Friction Pad provides additional grip for cylinder cambands.
OMS Mount Straps are ideal for attaching small cylinders to a Backplate. Attach the Straps to the OMS Backplate (Aluminium or Stainless Steel) using Book Screws - making it easy to adjust depending on your dive config.
The OMS Performance Double Wing is a doughnut style wing which allows quick and easy movement of air from one side of the air cell to the other. This design is specifically for use with double tanks. The doughnut config allows air to travel from one side to the other easily, which reduces the possibility of air trapping on one side of the wing.
The OMS Triglide is available in standard and serrated versions. The Triglide is designed with added friction to fix your accessories in place securely onto any Backplate with Webbing.2" D-Rings compliment this piece of kit perfectly.
A spare Mask Box with OMS Logos to keep your Mask safe when travelling. Fits all OMS Masks inside. Made from lightweight plastic.
The OMS Tattoo Mask comes with two designs: Ultra Clear or UV Protected. Both Masks are single lens and frameless, with ultra low volume. The UV Protected Mask also features a unique 3D contoured mask strap that prevents folding. Ultra-Violet underwater makes the colours more vibrant. The Mask is lightweight and great for travelling.The skirt design is...
The Silicone Mask Strap is a replacement strap for the OMS Tattoo Mask (UV and Clear).
The OMS Soft Single Tank Adapter helps stabilise a single tank onto a backplate. The Soft Tank Adapter is lightweight and excellent for travelling. This adapter is NOT required when using the OMS Performance Mono Wing as there is a built in air cell which includes a tank stabiliser system which serves the exact same functionality.
Available in various sizes.
The OMS Neoprene Mask Strap features a soft neoprene construction which eliminates pulled hair, and distributes pressure more evenly allowing for a better mask seal.
The OMS Mesh Bag with Shoulder Strap is available in both Pink and Grey. The Mesh material is excellent for quick drainage and incorporates PVC coated Nylon along the top and sides of the bag. The heavy duty zipper is long lasting and tough. There is also a padded carrying strap which makes this bag ideal for travelling and eases getting in and out of...
Diver's Alert Marker: 1m, Hybrid
The OMS SK Series features a Knife and Scissor Combo in one unit. The blades are made with tough stainless steel, and the gripped handle is made from thick and sturdy plastic. The unit is a knife in folded and locked position but easily opens into cutters with the flip of a lock.The Pouch comes with a velcro strap and a strong rubber band in the cover so...
OMS D-Rings are available in Stainless Steel and Aluminium; Aluminium is lightweight and great for travelling. Perfectly paired with the OMS Triglide.
The OMS Deluxe Underwater Notebook includes underwater paper with table windows, pockets and pencil holders.You can also purchase Paper Refills for the OMS Notebook.
The IQ Lite Cummerbund has been designed specifically to integrate with the OMS IQ Lite Backpack. Made from durable Nylon, padded with foam for added comfort and provided with a Velcro closure for ease. Each Cummerbund offers a small zippered pocket on the front.
The OMS Retractor Bands are the perfect match to any OMS Wing. The Retractor Bands are made from durable elastic silicone rubber tubing which is extremely strong yet easy to install. Retraction Bands increase the deflation rate of the wing and create a tidier diver which is convenient when diving in cave or wreck diving environments with no worries of...
SAVE 20% DISCOUNT CODE: SAVE20 The OMS Two Window Frameless Mask is available in Clear Silicone. The Frameless design means the mask is easy to fold flat for storage or travelling abroad. The mask features low volume with good vision.
The OMS Delrin Thumbwheels are designed as an option instead of the traditional metal wing nuts. OMS have designed the unique 3 point system, which gives you better grip when handling with gloves or in cold water.Delrin material is very durable and long lasting, especially in salt water and will not rust or corrode as metal does.
The OMS Soft Single Tank Adapter is lightweight and designed to stop excess movement on your back with heavy cylinders.This product includes Cam Bands.
Slim Big Diver's Alert Marker: (1.8m, open bottom, No-Lock, LP Connector with OPV, 12kg lift)
Diver's Alert Marker: 1.8m, Hybrid.
Stand out from the crowd with the gorgeous lightweight pink spool! Pink is not just for girls!The OMS Spool has a new and improved design which allows the diver to create drag and smoothly control the speed of the line by simply squeezing the center of the spool.Each spool comes pre-packed with the nylon line (75ft/23m) and there is also a stainless steel...
This sturdy Pouch is the perfect size for the SK Scissor Series (Pointed and Round) and comes with a sturdy velcro strap and a rubber band inside to hold tight to your Scissor/Knife unit.
The OMS Stainless Steel Weight Belt Buckle is designed with a traditional 3-slot opening on the back for attaching to standard 2" webbing.
OMS have introduced Safety Kits; each kit contains an SMB, Spool and Double-Ender Clip. The Safety Pocket attaches to any 2" webbing as well as your BCD. A handy zip permits easy access but prevents your gear from falling out.Stand out from the crowd with this grey bag and accessories to match - easily recognised by your diving buddies. There are 2...
The OMS Crotch Strap is compatible with all OMS products, backplates and harnesses.The strap is used for fastening a harness and backplate securely to a diver's body; one end of the strap is threaded onto the backplate and the other end is placed on the waist belt webbing. The crotch straps keep the harness in place during water entry. Sizes available:...
The OMS One Window Frameless Mask is built with a comfortable black silicone skirt. The One Window design allows a very wide and large viewing area which offers the maximum view. The low volume and nose pocket make it easy to clear as well as pinch the nose for equalisation.
SAVE 20% DISCOUNT CODE: SAVE20 The iconic OMS Slipstream Fin is made with Monoprene which creates a lightweight but hard-wearing fin. The Slipstream Fin has been made with a Spring Heel Strap which gives divers an easy donning fin, that also allows high performance in any type of condition.The lightweight material helps to keep the divers legs in optimal...
The OMS O-Ring Kit includes 18 different types of O'Rings.
The OMS Lift Bag comes in a high-vis orange made from heavy-duty nylon and webbing with durable construction. 50lbs and 125lbs available.
Diver's Alert Marker: 1m, Hybrid.
The OMS Line Arrow is formed by two adjacent arrows facing away from each other, marking a point in the cave where the diver is equidistant from two exits. The Line Arrow is white, 6.7cm in size and extremely lightweight.
The OMS Sea Snips feature strong stainless steel blades with a sturdy plastic handle for durability. The Pouch has a secure velcro strap for closure and mounts onto any 2" webbing. Dimensions: 8.5" x 2.5"
Replacement Webbing for any Harness System. 11ft long.
The OMS Aluminum Backplate is made by a superior de-burring process which helps elimate sharp edges on the Backplate. The Backplate is extremely lightweight, weighing in at a mere 0.8kg, so it is the perfect accessory to travel with.We recommend fitting the Aluminium Backplate to the OMS Comfort Harness System II for the ultimate Harness combination. The...
The OMS Line Cutter/Shears Pouch is designed for storage of Scissors or Knife. Easily mounted on to webbing in any direction.
The OMS Black Nylon Webbing is available in two options: 1" Standard Stiffness and 2" Medium Stiffness. The roll is 25 feet/7.6 meter of black replacement webbing and is great in the event of wear and tear on harnesses.
The IQ Lite Backpack is the travelling Harness for any travelling diver; an ultra-light system weighing in at only 1.2kg.The harness incorporates anodised aluminium accessories which maximises strength and keeps weight to a minimum. The IQ Lite can easily fit into a carry on bag so it is an excellent harness for travelling abroad. It can also be adapted...
The Stainless Steel D-Ring has become the diving industry standard. The ideal accessory when coupled with the OMS Triglide. Built to last.Available in 3 options.
The OMS Replacement Pocket is specifically for the OMS Ballast System. This is a replacement part ONLY and not a complete weight system. Fitted with a quick release buckle and a velcro closure.
The OMS Inflator is a standard power inflator which inflates and deflates. The OMS Inflator fits most BCD's that require a 1" inner diameter corrugated hose and has a fixed mouthpiece at a 45 degree angle.
The OMS Ballast System is two separate pockets which can hold up to 2.7kg on each side. The pockets are attached vertically for optimum streamling and has a built-in quick release buckle for ease. Fits onto any 2" webbing.Suitable to fit the IQ Backpack, IQ LITE (traveller edition) and Comfort II Harness when on a Backplate.
A soft padded Mask Strap with Buckles suitable for any Mask.
First Stage "Compact" 300 bar integrated OPV Thread G 5/8 with 1HP port
The OMS Cylinder Pressure Testing Gauge is designed for surface use. Maximum 400 bar or 5700 psi on dial display.
The OMS Stage SPG is a small and lightweight Gauge - perfect for Stage and Deco Bottles. OMS submersible pressure gauges (SPG) come with the necessary “O” ring swivel for installation.
The OMS Compass comes ready to go in a mount with bungee cords. The Compass itself is a liquid-filled compass with a large reading window. Extra grip is provided with this compass as it features ribbing on the bezel. Read the digits with plenty of ease with the high contrast numbers with a ratchet at every fifth degree.This version is balanced for the...
The OMS Single Tank Adapter is essential for divers who like to swap between single and double tanks. It can mount onto any OMS Harness and is ideal for the IQ Backpack and Comfort Harness.
The OMS Single Tank Adapter is a neccessity for scuba divers who like to switch between single and double tanks depending on the dive planned. The Adapter comes with Cam Bands which are equipped with two non-slip pads and plastic buckles to prevent corrosion.It can mount onto any OMS Harness and is ideal for the IQ Backpack and Comfort Harness.
OMS Rubber Bands are a MUST HAVE on every dive. Tuck your loose hoses away securely and safely and have a streamlined dive, on every dive, wherever you are diving.Three options are available: 40 Cubic Foot, 80 Cubic Foot, and 7 Litre cylinders.
The OMS Dry Bag Backpack is a large dry bag which is completely waterproof; designed to keep all of your gear dry during any adventure. The seams are bonded to ensure extra safety with your diving gear, and the roll down/buckle feature allows you to fill with clothing, towels, and electrical goods.The OMS Dry Bag Backpack is even big enough to store your...
The OMS Gear Bag (sometimes known as a Knapsack) is large, heavy duty that provides ample space to store your equipment. The Gear Bag comes with hard-wearing straps so may be carried as a duffle bag or backpack as needed.
The OMS Roller Bag is the perfect diving bag for travelling abroad. Weighing in at 3.8kg, it is ideal for airports and still having enough weight for your dive gear.The Roller Bag has heavy duty, chunky off-road wheels for extra durability. The Bag itself is made from 840 Denier Nylon with a sturdy handle and backpack straps for convenience.80L capacity....
Diver's Alert Marker - Slim (1.8m, Closed, No-Lock, LP Connector with OPV, 12kg lift)
Diver's Alert Marker: 1.8m, Hybrid.
Diver's Alert Marker: 1m, Hybrid.
The OMS Weight Belt Buckle is compatitable with any 2" webbing material and made from lightweight aluminium. The aluminium is anodised which increases resistance to wear and corrosion. This process makes the buckle a darker colour which is simply aesthetic but also reduces glare in photographs.
Pencils for OMS Wetnotes.
The OMS Jon Line is a 8ft line used to fasten divers to something. It can also be used to tether your equipment to the dive boat before or after the dive. The Clip can be attached your buoyancy device (backmount, harness etc).
The OMS Jon Line is a short line used to fasten divers to something. It can also be used to tether your equipment to the dive boat before or after the dive.There is also a Pouch and Clip included so you can instantly attach this yourself. The Clip can be attached your buoyancy device (backmount, harness etc). The Jon Line itself is 8ft long.
The OMS Elbow Assembly (with OVP) is a connection elbow with integrated pressure relief valve for connection to Wings. What's included: Knee, Pressure Relief Valve, Seal, Steel Cable, Pin and Cable Ties.
The OMS Cargo Pocket is large enough for a foldable mask, knife, or any other accessories like a GoPro camera.
The OMS Performance Mono Wing is a doughnut style wing allowing air to move around quickly with more ease. This is the ideal wing for a diver who travels, as it is small and lightweight which makes it easy to pack. The Mono Wing will fit onto the OMS IQ Backpack, Aluminum or Stainless Steel Backplate using the Comfort Harness II or Continuous Weave (DIR)...
The OMS Comfort Harness System II comes with a Stainless Steel Backplate. The design is a direct over the shoulder harness with padded shoulder straps for extra comfort. For convenience, a slide release buckle is positioned on both sides of the harness and a stainless steel waist buckle.The OMS Harness also includes adjustable D-Ring (4 chest and 2 waist)...
The OMS Stainless Steel Backplate is designed to fit the Comfort Harness System 2. The Backplate is heavy duty and designed to work with single tanks or doubles, depending on preference.
The OMS Torch Pouch is ideal for storing a small backup or primary light on any 50mm webbing.
The OMS Crotch Strap is compatible with all OMS harnesses and backplates. It is used for fastening a harness or backplate securely to a diver's body. The crotch straps keep the harness in place during water entry. By using a crotch strap, divers can prevent their gear slipping upwards on the body in the water, reducing the likelihood of the tank touching...
The OMS Sidemount Rec Adapter is designed for the open water sidemount diver. This Adapter allows the diver to mount onto the OMS Performance Mono, OMS Deep Ocean or the OMS Tesseract Wing.Book Screws are required (not included) to hold the adapter in place on an IQ or Backplate. The Adapter features 6 D-Rings made from sturdy stainless steel which are...
The OMS Ballast System is two separate pockets which can hold up to 6.8kg on each side. The pockets are attached horizontally and has a built-in quick release buckle for ease. Fits onto any 2" webbing.Suitable to fit the IQ Backpack, IQ LITE (traveller edition) and Comfort II Harness when on a Backplate.
First Stage "Compact" with integrated OPV, W21/8 Thread Inert Gas
The OMS Airstream Evoque Regulator is now available in a package combo with the Octopus and Hose.Airstream First StageThe OMS high performance regulator was designed to optimise hose routing. The development of specialised high pressure ports (HP) angled at 45 degrees, keeps gauges closer to the diver’s hips. The 30 degree angled low pressure ports (LP)...
The OMS Miniature SPG is small and compact, and fits directly onto the HP Port on the First Stage. The SPG is encased with durable stainless steel so is built for extreme diving. Our mini SPG dial reads from 0-350 bar.
This OMS SMB is designed with an open bottom allowing the diver to inflate using the second stage of a regulator. This SMB is a standard piece of gear for divers performing drift or decompression dives.Before using this equipment, divers are recommended to seek instruction under the guidance of a qualified instructor.Available in Orange and Yellow.
Cookies are sometimes preferred over line arrows for setting up circuits because a directional marker on the line could be misinterpreted as pointing away from the closest exit.The OMS Cookie Marker is 5.5cm which is ample size without taking up too much space.
The IQ Lite Backpack is the ultimate Harness for any travelling diver; a super lightweight system weighing in at only 1.2kg. The Cummerbund edition includes the Vertical Weight System 12lbs (5.4kg).The Harness incorporates anodised aluminium accessories which maximises strength and keeps weight to a minimum. The IQ Lite can easily fit into a carry on bag...
The OMS Deep Ocean Wings include the Retraction Band System which helps keep your wing folded behind the diver's shoulders. The outcome of this means less drag and less chance of getting tangled up with the rest of your kit. The bands can be adjusted for different dive configurations, i.e. stage bottles, carrying camera systems or to optimize personal...
The OMS Trieste Double Bladder Wing has been designed with a two-bladder configuration; which is super important to divers who prefer a redundant bladder with their wing. The second bladder is designed to ensure accurate buoyancy control if your first bladder fails. The Trieste Wing is for serious deep diving with lots of weights/heavy tanks.The power of...
The OMS Ocean Wings have been configured with the classic horseshoe design. The horseshoe shape allows the diver to keep the wing folded behind the shoulders to reduce drag and the chance of entanglement. All OMS Wing's feature rugged 1000 denier nylon, backed with urethane for superior abrasion resistance in all overhead environments on the outer bag...
The OMS Webbing Package includes all of the essentials for your Harness:1 x Harness Webbing with Grommet1 x Crotch Strap with two D-Rings and Tri-Glides2 x Stainless Steel Bent D-Rings1 x Stainless Steel Straight D-Ring5 x Stainless Steel Tri-Glides6 x Rubber Bands for Harness1 x Rubber O-Ring for Left Chest D-Ring2 x Stainless Steel Belt Buckles
OMS Silicone Tubing is used to attach items to a BCD, strap items onto your arms and anchor hoses to your cylinders.
25 feet/7.6 meter roll of 2" (5cm) replacement webbing is available in the event of wear and tear on harnesses. This webbing can be used to replace most 2″ webbing on your dive gear.
The OMS Comfort Harness utilises the same padded shoulder strap configuration found on the OMS IQ Backpack. It can be installed on any standard backplate as an accessory, and we highly recommend to pair with the OMS Stainless Steel or Aluminium Backplate.
The OMS Back Pad can be easily added on any OMS Backplate to create an additional layer of comfort. The OMS Pad is a new design and also offers a unique accessory pocket accessed along the bottom of the pad that can be used for lift bag or marking tube storage.Includes Bolt Kit.
The OMS Sidemount Tech Adapter is designed to be used with the OMS Tesseract Wing. The Adapter wraps over the top of the wing, as the airways are positioned on the left and right of the wing. In addition, the Tesseract Wing’s retraction bands can be re-threaded to make it tidier and easy, whilst keeping the wing from folding up on the diver.The Adapter...
The OMS Integrated Weight Pocket allows quick release storage for up to 7kg of weight and other accessories such as lights/torches. Fitted with a unique strap which improves comfort above the surface.